Weldingtable 1000 x 1000 x 150

From  675,00

SKU: N/A Category:

The 1000 × 1000 mm welding table is an ideal format for the somewhat smaller workshop or when your workpieces are usually smaller than 1000 mm. It can be ordered in different variants.


Sheet thickness
With minimal use, a 10 mm blade is fine. If you are going to use the welding table on a daily basis, we recommend choosing 15 mm.

We weld the welding table together for you. We also clean all holes with a suitable reamer.

Building kit
You can also assemble the welding table yourself, you still have to weld it together and check it.
Would you like to know how to weld the table together? Watch our instruction video here!

As standard we sell welding tables with holes around 20.
Holes around 16 and around 28 are available at an additional cost (+ €50,-) .

As standard we sell the welding tables including the legs that are equipped with an adjustable foot.

If you want to be able to move the table quickly and easily through your workshop, we recommend ordering a wheel set (+ €399) .
Do you already have a lifting table or your own base on which you want to mount a Lastafelshop top (top, side cheeks and reinforcement ribs)? Then choose the option ‘no frame’ (- €100).



top sheet
1000 x 1000 x 150 mm, available with a top thickness of 10 and 15 mm.

Reinforcement Edge
Is equipped with clamping holes. Formats: 1000 x 150 x 10 mm and 1000 x 150 x 10 mm.

Reinforcement ribs
Under the table are 6 mm thick with a center size of +/- 500 mm both in length and width.

Hole pattern
The holes have a center of 100 mm. This allows 180 positions for the clamping jaws in this model.

Steel S355MC pickled and oiled.

Adjustable from 920 to 1000 mm.

Consists of tube 100 x 100 x 3 mm in combination with tube 50 x 30 x 3 mm. This base is provided with a rubber adjustable foot M20 so that the table can be leveled on almost any surface.

This model can be linked to all our standard models.

Top +/- 1 mm and the sides +/- 1 degrees.

Additional information


Building kit, Composed

Blade thickness

10 mm, 15mm


16 mm, 20 mm, 28 mm


Default, No chassis, Wheelset

Grid engraving

no, yes


There are no reviews yet.

Be the first to review “Weldingtable 1000 x 1000 x 150”

Your email address will not be published. Required fields are marked *