This table is ideal for large projects. When the other tables are all too small, we have this giant in our range for you!
This table has standard grid engraving.
Sheet thickness
Standard 15mm.
Composite
We weld the welding table together for you. We also clean all holes with a suitable reamer.
Building kit
We do not recommend ordering a kit for this table size.
holes
As standard we sell welding tables with holes around 20.
Holes around 16 and around 28 are available at an additional cost (+ €50,-) .
chassis
As standard we sell the welding tables including the legs that are equipped with an adjustable foot.
top sheet
3990 x 1990 x 15 mm, available with 15 mm blade thickness.
Reinforcement Edge
Is equipped with clamping holes. Formats: 3990 x 150 x 15 mm and 1990 x 150 x 15 mm.
Reinforcement ribs
Under the table are 6 mm thick with a center size of +/- 500 mm both in length and width.
Hole pattern
The holes have a center of 100 mm.
As a result, 1140 positions are possible for the clamping jaws in this model.
Material
Steel S355MC pickled and oiled
Height
Adjustable from 920 to 1000 mm.
chassis
Consists of tube 100 x 100 x 3 mm in combination with tube 50 x 30 x 3 mm. This base is provided with a rubber adjustable foot M20 so that the table can be leveled on almost any surface.
Employability
This model can be linked to all our standard models.
Tolerance
Top +/- 1 mm and the sides +/- 1 degrees.
Reviews
There are no reviews yet.